The propeller hub is generally housed in the propeller and attached to the outboard power shaft of the motor's lower unit in a marine application. The propeller hub is the crucial link between the power-generating engine and the propeller that generates movement in either case.
The solid central disk that fits with the propeller shaft and the blades are attached is known as the propeller hub. The hub should ideally be as tiny as feasible in diameter to achieve optimum thrust. However, there is a cost associated with both size and strength. A too-small hub will not be powerful enough in the end.
Thanks to a propeller-mounted hub, the unit is replaced and serviced as a single entity. If any portion of the propeller or hub is damaged, both pieces must be removed and replaced, or the entire unit must be replaced. Due to the tendency of a boat propeller to collide with a submerged object, the propeller must be able to slip on the hub in order to decrease the risk of damage to the outboard motor's complete lower unit.
Specification:
- Brand: HMS Hubs
- SKU: VS-34
- Weight: 0.40 LBS
- G/C SIZE: 3.25
- DRIVE TYPE: 13 Spline
- HUB TYPE: Rubber
- Spindle length: 2.840" (~2 13/16")
- Flange Dia.: **
- Rubber O.D.: 2.155"
- Max. Inside Dia.: 0.885"
- Uses Wear Ring: none
- Rubber Duro: 70
- Spline count: 13 spline
Applications:
- Chrysler 55-65 hp
- Honda BF 35-50 hp
- Johnson/Evinrude 40-50 hp 4-stroke
- Mercury Models 400-650
- Mariner 60 hp
- Suzuki DT 35-65 hp
- Tohatsu, Nissan 35-50 hp
- Yamaha 40-60 hp*
Engine Application
Chrysler
Chrysler 55, 65 hp?1978-later
Johnson-Evinrude
Johnson-Evinrude 40-50 hp, 4-Stroke,?1999-thru
Honda
Honda BF 35-BF 60 hp
Mercury
Mercury 40-50 hp?1970-73
Mercury
Mercury 40-50 hp?1974-76;
65 hp?1972-76
Suzuki
Suzuki DT 35, 40, 50, 55, 60, 65
Tohatsu
Tohatsu, Nissan 35-50 hp
Yamaha
Yamaha 40, 50 hp?1984-later;
55, 60 hp?1976-81
This product replaces:
- 65205, 62999, 65-205, 859827, C-62999, C62999, VS34
