Marine Machining & Manufacturing

Marine Machining & Manufacturing 1/2" Stainless Steel Shaft Key (1/2" Sst Key)

The 1/2" Stainless Steel SHAFT KEY (1/2" SST KEY) is constructed with high-quality stainless steel that prevents easy deterioration in the harsh marine environment. It has a high tolerance and a...

Marine Machining & Manufacturing 1/4 Pound Spool Stainless Steel Safety (1/4# Tie Wire)

This stainless spool is used in coupling screws reinforcing fasteners and other parts for stability during use. It provides a reliable, built to withstand large forces on them. Broken connections and...

Marine Machining & Manufacturing 1/4" Brass Shaft Key (1/4" Brass Key)

Metric Shaft Keys are rectangular or square keyways that fasten rotating components to a shaft. Shaft Keys are placed into slots cut in a pulley or sprocket to put together a spinning assembly. A...

Marine Machining & Manufacturing 1/4" Stainless Steel Keystock (1Foot.) (1/4 Sst Key(12"))

A pulley, gear, sprocket, or other rotating power device's hub and a shaft are connected by a small metal block or wedge known as a keystock. It generates driving torque while impeding motion. A key...

Marine Machining & Manufacturing 1/4" Stainless Steel Shaft Key (1/4" Sst Key)

The 1/4" Stainless Steel Shaft Key (88-602) square keys are short bars that can be any length but have the same height and width, and they're used to restrict relative rotation between a shaft and a...

Marine Machining & Manufacturing 3/16" Brass Shaft Key (3/16" Brass Key)

Using a keyed joint, shaft keyways and keys are used to transfer torque from shafts to mechanical transmission components like gears, pulleys, etc. They can be produced either using a conventional...

Marine Machining & Manufacturing 3/4-10 Sae Brass Nylock Nut (3/4-10 Nylocknut)

For prop end of shaft.This product replaces:88-002, 11-29594

Marine Machining & Manufacturing 3/8" Brass Shaft Key (3/8" Brass Key)

Most propeller shafts use keys to transmit torque from it to the propeller. The brass key is a long, thin rectangle of metal that runs the length of the shafting and slides into a keyway or slot that...

Marine Machining & Manufacturing 3/8" Stainless Steel Shaft Key (3/8" Sst Key)

A keyed joint shaft keyways and keys transfer torque shafts to mechanical transmission components like gears, pulleys, etc. They can be produced using conventional stock material, like key stock, or...

Marine Machining & Manufacturing 4" X 1" Shaft Solid (40002)

Set screws included with couplingThis product replaces:40002

Marine Machining & Manufacturing 4" X 3/8" Bolt - Coupling - Marine Machining & Manufacturing (40004)

A coupling bolt is a mechanical device that connects two halves of a flanged shaft to properly distribute the torque while maintaining shaft alignment. Misalignment, for example, produces vibration,...

Marine Machining & Manufacturing 4" X 3/8" Bolt-Solid Coupling - Marine Machining & Manufacturing (40003)

Set screws included with couplingThis product replaces:40003This product replaces:40003