Raymarine

Raymarine Ais700 Class B Ais With Splitter

$1,199.99
In Stock
(0) Write a Review
SKU:
WTRAYE70476
UPC:
723193822616
Adding to cart… The item has been added

Raymarine AIS700 Class B AIS with Splitter

Model: E70476
  • Full transmit and receive AIS for enhanced situational awareness and safety
  • Latest SO-TDMA networking for longer range and faster performance
  • Built-in antenna splitter simplifies installation with existing VHF radio antenna
  • NMEA2000, NMEA0183, PC and SeaTalkng Compatible
  • Software or hardware switchable Silent Mode for enhanced security when needed

The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems. As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems.

Specifications
Evironmental
Operating temperature-15°C to +55°C
Storage temperature-20°C to +75°C
Water ingressIPX6 and IPX7
HumidityUp to 93% @ 40°C
Power
Power Supply12v and 24 nominal
Power Consumption<3W
<3W3A
Load Equivalency Number1 LEN
RF Specifications
DSC ReceiverImplemented by time sharing with one TDMA receiver
Receiver 1 band156.025 MHz to 162.025 MHz (in 25KHz steps)
Receiver 2 band156.025 MHz to 162.025 MHz (in 25KHz steps)
Transmitter band156.025 MHz to 162.025 MHz (in 25KHz steps)
Transmitter specificationTo meet IEC 62287-2 relevant sections
Receiver specificationTo meet IEC 62287-2 relevant sections
Transceiver specificationTo meet IEC 62287-2 relevant sections
GPS receiveru-blox MAX-M8W
GPS receiver channels72 channels
GPS Cold start acquisition time26s nominal
Positional sourceGPS & GLONASS
AIS performance5W SOTDMA
External Connection
VHF antenna connector typeSO-239 co-axial
VHF radio connector typeSO-239 co-axial
GNSS antenna connector50 Ohm TNC co-axial
NMEA2000DeviceNet male
USBMicro-B
External interface isolationNMEA0183 and NMEA 2000 interfaces to incorporate galvanic isolation from power supply as required by the relevant interface specification.
NMEA0183 interface 1 (MFD connection)NMEA 0183 HS (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). Configurable baud rate. Input to MFD from AIS.
NMEA0183 interface 2 (NMEA0183 instrument connection)NMEA 0183 (IEC 61162-1) compliant, bi-directional, RS422 levels. 4 wire interface (differential signalling). 4 wire interface (differential signalling) Configurable baud rate
USB interface (PC connection)Protocol NMEA 0183 HS (IEC 61162-1) compliant, bi-directional USB port, 38.4 kBaud

What's in the Box:
  • AIS700 Class B AIS Transceiver with built-in VHF antenna splitter
  • GNSS (GPS) Antenna
  • Power / data cable 2m (6.56 ft)
  • VHF Radio cable 1m (3.28 ft)
  • DeviceNet to SeaTalkng® adaptor cable 1m (3.28 ft)
  • GNSS antenna gasket
  • GNSS antenna pole mount
  • Unit fixings (4 x No.8x19 self tapping screws)
  • M5 nut and washer (grounding)
  • Documentation kit
  • GNSS antenna fixings (3 x M3x40 stud and thumb nut)
  • Software CD