Redline Hub Kit With five on 4.5" Bolt Pattern- 1" Spindle For 2,000 lb Axles Redline hub kits include some essential parts, such as the inner and outer bearings. The races are already pressed into the hub for you with Redline kits, so you don't have to bother about them. The hub's oil seal, grease cap, and wheel bolts are in the equipment. Each has a capacity of 1,250 lbs and is for use with a 1" diameter spindle. Spindle nut and spindle washer are offered separately.
Key Features:
- Constructed with care and precision from high-quality materials
- Designed to fulfill the most exacting quality requirements
- High-quality at a reasonable cost
- It's ideal for maintenance and replacement.
- The setup is basic and straightforward.
Product Specifications:
- SKU: 4-106216
- UPC: 640603127126
- Weight: 7.00 LBS
- 2 L44643 Inner and Outer Bearings (1" ID)
- 1 12192TB Grease Seal (1.25" x 1.979")
- 1 46749 Grease Cap (1.986" OD)
- 1 21-41-1 Grease Cap (1.986" OD)
- 1 85-1 Grease Cap Plug
- 5 X1023R Coned Wheel Nuts
- 1 5 on 4.5" Pregreased Hub For Convenience
Redline Hub W/ 5 on 4.5" Bolt Pattern- 1" Spindle For 2,000 lb Axles Redline hub kits come with some of your main components like the inner and outer bearings. With Redline kits there is no need to worry about the races as they are already pressed into the hub for you. You will also get the grease seal, grease cap, and wheel nuts for the hub. This hub is designed for use with a 1" diameter spindle. Each hub has a capacity of 1,250 lbs. Spindle nut and spindle washer sold separately. Items in Kit: ? 2 L44643 Inner and Outer Bearings (1" ID) ? 2 L44610 Inner and Outer Races(Already Pressed In) 1.98" OD ? 1 12192TB Grease Seal (1.25" x 1.979") ? 1 46749 Grease Cap (1.986" OD) ? 1 21-41-1 Grease Cap (1.986" OD) ? 1 85-1 Grease Cap Plug ? 5 X1023R Coned Wheel Nuts ? 1 5 on 4.5" Pregreased Hub For Convenience ? 1,250 lb Capacity Per Hub ?4" Overall height To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.
