Trelex

Trelex 1 1/4" X 1 3/4" X 5" Non-Met (Ef1000)

Trelex 1 1/4" X 1 3/4" X 5" Non-Met (Ef1000)

Trelex 1 1/8 X 1 1/2 X 4 1/2 Brass (E01100)

The cutlass bearing from Morse Bearings is designed to withstand the harshest service conditions in industrial or marine environments that are corrosive and abrasive. Hard surface bearings won't last...

Trelex 1 1/8 X 1 3/8 Outside Diameter 4" Lngth (E01209)

This product replaces:E01209, E1209, 1209

Trelex 1 3/4 X 2 3/8 X 7 Brass (E02700)

Trelex 1 3/4 X 2 3/8 X 7 Brass (E02700)

Trelex 1 3/8 X 1 7/8 X 5 1/2" Brass (E01900)

A Devilfish (E01900) is a brass sleeve cutlass bearing that provides a wear surface between propeller shafts and struts or rudder shafts & rudder ports. Designed to have a rubber oil-resistant shaft...

Trelex 1 3/8 X 2 X 5 1/2" Brass (E02000)

The cutless bearing, which supports the shaft and promotes smooth rotation, is found just before a propeller shaft connects to the propeller. Cutless bearings are often composed of bronze,...

Trelex 1" X 1 1/4" X 6" Brass (E00650)

1" X 1 1/4" X 6" BRASS (E00650) sleeve bearings consist of a bearing surface and a mating component. These are relatively common but very effective components. Its job is to ensure that two elements...

Trelex 1-1/4 X 1-1/2 X 5 Bronze - Morse Controls (Chogset)

The Morse Rubber LLC 1-1/4 X 1-1/2 X 5 BRONZE is a high-quality rubber-lined and water-lubricated marine brass strut bearing. The water in which the vessel is traveling provides lubrication, making...

Trelex 1-1/4 X 1-3/4 X 5 Bronze - Morse Controls (Chub)

The bearings are rubber-lined and greased with water. They don't require any seals or lubrication in the form of oil or grease. The water in which the vessel travels provides lubrication, making...

Trelex 7/8 X 1 1/2 X 3 1/2" Brass (E00400)

Trelex 7/8 X 1 1/2 X 3 1/2" Brass (E00400)